Summer Cruising: How to Get Your Boat Ready for the Water  


You can enjoy the summer season in many ways; you can swim in a lake, travel abroad, or cruise on a ship. It’s a season when everyone wants to get out and explore the world! And, of course, the summer vacation wouldn’t be complete without dipping in the waters, but if you don’t know how to swim, well, you can ride a boat for a summer cruise.

But, before hitting the waters, you must ensure that your ship is ready for a day-long travelling adventure. You must inspect if the marine electrification and diesel electric marine propulsion systems are all working. Otherwise, you’ll get stuck in the middle of the waters, hoping there’s no monster lurking beneath. Anyways, probably not going to happen, but still, you should know the proper steps to prepare your boat for water travel.

As the summer approaches, better continue reading this article to know how to prepare a boat by checking its parts, including the stern thruster and inspecting the marine electrification. This way, you can travel with ease and enjoy your summer vacation!

Steps to Prepare Your Boat for Your Water Travel This Summer

No one’s anticipating an accident. Instead of enjoying your vacation, it can cause trauma and anxiety scarring you for your whole life! Although there’s nothing wrong with travelling, it’s your responsibility to ensure that you and your family are safe. So, if you’re a boat or ship owner, you should learn the necessary steps to prepare your boat’s stern thruster, tunnel thruster, and other parts for the water.

Here’s how you can prepare your boat for your future water travels!


1) Start By Making a List

As a novice or beginner, you might feel confused about inspecting to prepare your boat for the summer. To solve this, make a list of all the things you need to do from start to finish. Yes, it would take a lot of effort, but you’ll get used to it and be more adept with boat inspections as time goes by. Since you’re still a beginner, let this article lay down the list for you.

  • General cleaning for the whole boat/ship
  • Add wax to protect the paint
  • Inspect windows, doors, and other fixtures
  • Replace old or worn-out boat parts
  • Look for general damages and provide solutions right away
  • Test if the diesel electric marine propulsion systems are still working
  • Test drive the boat

Here are some of the things you should do before travelling. You can also add steps as your boat may require a more customised inspection. Also, don’t forget to call for a professional if you need to check marine electrification for your safety. As you ensure these things, you feel more confident that you’ll be safe while cruising.

2) Assign Tasks Per Day

After making a list, you should delegate tasks per day. Of course, you can’t finish all of the lists in just one day. You might probably overlook things that can affect your safety if you do that. To break down the task, you can base it on boat parts like the stern and tunnel thruster, specific issues, and other components. With this method, you’ll focus on each task and ensure that all essential things are covered.

You can also try other methods, but make sure that you use a technique that will help you stay organised. You can even look for a professional that can help you finish the task day by day. Finally, keep in mind that you need at least months or weeks for your boat preparation.

3) Inspect the Interior The Exterior Boat Parts

Professionals say that you should check the boat from the inside out. Well, it is because the interior parts are essential when it comes to the functionality of your boat. When checking the insides, don’t forget to include the marine electrification and battery powered ship propulsion. With this, you’ll be able to determine whether they are safe for your water travels.

Upon checking the interior parts, you will also know what you need to change. You’ll determine if the internal components like the hull are fully-functioning. As you ensure that everything is working correctly, you can now move forward with the exterior parts.

Exterior parts like the stern, cleat, starboard, and gunwale also need a thorough inspection. You should check if there are damages or holes to prevent the water from getting inside the boat. To avoid these scenarios, have a meticulous examination of the interior and exterior parts before travelling.

4) General Cleaning for the Boat

After checking the whole diesel electric marine propulsion systems and the exterior part, you should now clean the boat. If you want some help as cleaning can be tedious, you can look for a professional who can do the job for you. But, before that, look for a cleaning product appropriate for your boat to avoid more damages.

You can also spot holes and scratches easily as you do the cleaning process. You can put wax to make your boat look brand new! Setting wax can also add some protection to the boat exterior. Indeed, cleaning and waxing the ship may be a tedious task, but don’t skip this because it’s an essential step to ensure your safety while onboard.

5) Bring Emergency Kit and Repair Tools

While in the middle of the lake or ocean, there are chances you won’t get any signals. It’s harder to get some help when an accident happens. Therefore, immediately bring an emergency kit and repair tools to solve the crisis. Don’t forget to include band-aids, toiletries, flashlights, batteries, etc. On the other hand, essential repair tools can help you troubleshoot minor problems while cruising.

6) Call a Professional

Finally, it’s essential to call for a professional if you need guidance for your boat repair and inspection. Marine electrification and diesel electric marine propulsion systems may confuse some newbies. So, it’s better to let a professional guide you to ensure that the things you’re doing are right. Plus, it will give you peace of mind that you’ll be safe while cruising a lake.

Enjoy your water travels by partnering with E-Pod that offers greener and effective solutions for your boat system. Visit their website to know more about marine electrification, stern thruster, tunnel thruster, and battery powered ship propulsion.